7208L25JI

7208L25JI Overview

FIFO memory chip is included in the PLCC package.The recommended mounting way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.I found that it has 32 terminations in FIFO means.FIFO design has 32 operation pins.FIFO requires a minimum of 120mA current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.It has a total of 32 pins on it.It is normal for a component to be equipped with 5V power supplies.A clock on the FIFO memory IC runs at a frequency of 28.5MHz .

7208L25JI Features

FIFOs category
Clock frequency of 28.5MHz

7208L25JI Applications

There are a lot of Integrated Device Technology (IDT) 7208L25JI FIFOs Memory applications.

• A/D output buffers
• GPS Offender Tracking
• High-speed disk
• Look-up Tables
• Alarm System
• Transistors
• Signal processing
• Thermal Management for DDR3 Memory Modules
• Game Controller
• Switches