72201L15J8

72201L15J8 Overview

This package is included in PLCC .The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.The operation pins are 32 pins.In order to operate it, it requires 35mA volts of current.A voltage of 5V should be used for FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.Approximately 32 pins are attached to it.It is capable of maintaining good accuracy with a frequency of 66.7MHz .A FIFO memory's maximum value of 66.7MHz can be used for regular operation.Normally, the component owns 5V power supplies.

72201L15J8 Features

FIFOs category
Frequency at most

72201L15J8 Applications

There are a lot of Integrated Device Technology (IDT) 72201L15J8 FIFOs Memory applications.

• Alarm System
• SPI Bus Flash Memory Devices
• Network switching/routing
• Digital buffering
• Temporary storage elements
• Cardiac Monitoring Device
• Network bridges
• IP Camera Buffer
• SPD for DDR3 Memory Modules
• PC peripheral