72215LB10TF

72215LB10TF Overview

You will find FIFO memory chip in the TQFP package.Mounting it in the Surface Mount way is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.I found that it has 64 terminations in FIFO means.64 pins are used for operation.In order to operate it, it requires 60mA volts of current.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained in FIFOs .It has a OTHER FIFO memory type IC.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.Approximately 64 pins are attached to it.In the presence of a 100MHz frequency, it can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .Normally, 5V power supplies are owned by the component.

72215LB10TF Features

FIFOs category
Frequency at most

72215LB10TF Applications

There are a lot of Integrated Device Technology (IDT) 72215LB10TF FIFOs Memory applications.

• Networking
• Data-acquisition systems
• Extended product-change notification
• Digital buffering
• Address mapping
• Signal processing
• Industrial Systems
• SPI Bus Flash Memory Device
• Alarm System
• Optical memories