72221L25PFI8

72221L25PFI8 Overview

TQFP is a package that contains FIFO memory chip.In this case, it is packaged in case number Tape & Reel .The recommended mounting method for this FIFO products is Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 32 terminations.The operation pins are 32 pins.In order to operate it, it requires 35mA volts of current.In order to maximize efficiency, the supply voltage should be set to 5V .This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.It is self-contained in FIFOs .The IC of the part is OTHER FIFO memory type.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 32 pins on this board.It is capable of maintaining good accuracy with a frequency of 40MHz .Normally, the FIFO memory's maximum value is 40MHz .Components normally possess 5V power supplies.

72221L25PFI8 Features

FIFOs category
Frequency at most

72221L25PFI8 Applications

There are a lot of Integrated Device Technology (IDT) 72221L25PFI8 FIFOs Memory applications.

• Controlled baseline
• HDD
• Rate buffers
• Signal processing
• Multimedia
• Disk Controllers
• SPI Bus Flash Memory Device
• Character generators
• Portable Information Devices
• Queues for communication systems