72225LB10PF8

72225LB10PF8 Overview

You will find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.The number of terminations in FIFO means is 64 .FIFO design has 64 operation pins.FIFO design requires 60mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained in FIFOs .This part has a memory type of OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.A total of 64 pins are present on the FIFO memory IC.With a frequency of 100MHz , it exhibits good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.In normal circumstances, the component has 5V power supplies.

72225LB10PF8 Features

FIFOs category
Frequency at most

72225LB10PF8 Applications

There are a lot of Integrated Device Technology (IDT) 72225LB10PF8 FIFOs Memory applications.

• Alarm System
• Optical memories
• Video time base correction
• Programmable Logic Controller
• Communications
• Networking
• General Data Collection Applications at Extreme High-Temperatures
• Consumer Systems
• High-speed disk
• PC peripheral