72230L10TP

72230L10TP Overview

FIFO memory chip can be found in the PDIP package.The recommended mounting method for this FIFO products is Through Hole .When the supply voltage is 5V , high efficiency is possible.A total of 28 terminations can be found in FIFO means.Operation pins are 28 .FIFO requires a minimum of 40mA current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget in FIFOs is self-contained.This part is equipped with an IC of type OTHER FIFO memory.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.This FIFO memory IC is equipped with 28 pins in total.With a frequency of 100MHz , it exhibits good accuracy.For regular operation, the memory logic's maximum value is 100MHz .Components normally possess 5V power supplies.

72230L10TP Features

FIFOs category
Frequency at most

72230L10TP Applications

There are a lot of Integrated Device Technology (IDT) 72230L10TP FIFOs Memory applications.

• Telecommunication
• Routers
• Network switching/routing
• SPD for DDR3 Memory Modules
• Alarm System
• Networking
• Network bridges
• Temporary storage elements
• Disk Controllers
• Data-acquisition systems