72231L15PFGI

72231L15PFGI Overview

TQFP is a package that contains FIFO memory chip.In this case, it is packaged in case number Bulk .It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V , high efficiency is possible.A total of 32 terminations are contained within FIFO means.As far as the operation pins are concerned, they are 32 pins.Its maximum operating current is 35mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.This gadget is self-contained in?FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.There are a total of 32 pins on this FIFO memory IC.When the frequency is set to 66.7MHz , the system can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .There are normally 5V power supplies attached to the component.

72231L15PFGI Features

FIFOs category
Frequency at most

72231L15PFGI Applications

There are a lot of Integrated Device Technology (IDT) 72231L15PFGI FIFOs Memory applications.

• Rate buffers
• One assembly
• Microprogramming
• Fabrication Site
• Queues for communication systems
• TVs
• Data-acquisition systems
• Measurement Equipment
• Magnetic memories
• Network switching/routing