72241L10PF

72241L10PF Overview

TQFP is the package in which FIFO memory chip is contained.A Surface Mount mounting method is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO consists of 32 terminations, which indicates that FIFO means is empty.32 pin is used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.A total of 32 pins are present on the FIFO memory IC.With a frequency of 100MHz , it exhibits good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .Normaly, the component is powered by 5V power supplies.

72241L10PF Features

FIFOs category
Frequency at most

72241L10PF Applications

There are a lot of Integrated Device Technology (IDT) 72241L10PF FIFOs Memory applications.

• Optical memories
• SPI Bus Flash Memory Device
• Firmware loaders
• Video time base correction
• Data
• Cardiac Monitoring Device
• Product traceability
• MP3 Interface for Automobile
• Thermal Management for DDR3 Memory Modules
• Portable Information Devices