72241L25J8

72241L25J8 Overview

PLCC is the package in which FIFO memory chip is contained.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains 32 terminations.32 pin is used for operation.In order to operate FIFO design, a maximum current of 35mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.70°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , there is a self-contained gadget.This part is equipped with an IC of type OTHER FIFO memory.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.This FIFO memory IC is equipped with 32 pins in total.When the frequency is set to 40MHz , the system can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 40MHz .Components normally possess 5V power supplies.

72241L25J8 Features

FIFOs category
Frequency at most

72241L25J8 Applications

There are a lot of Integrated Device Technology (IDT) 72241L25J8 FIFOs Memory applications.

• Microprogramming
• Laser Receiver System
• Emulators
• IP Camera Buffer
• SPI Bus Flash Memory Devices
• Tape controllers
• Medical Monitoring Device
• High-speed disk
• Seismic Data Collection at Extreme Temperatures
• Test site