72251L15JGI

72251L15JGI Overview

The PLCC package contains FIFO memory chip.Mounting it Surface Mount is recommended.With a supply voltage of 5V volts, high efficiency is possible.I found that it has 32 terminations in FIFO means.As far as the operation pins are concerned, they are 32 pins.FIFO design requires 50mA amps of current to operate.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.It is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.The FIFO memory IC is equipped with a total of 32 pins.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .Normally, the component owns 5V power supplies.

72251L15JGI Features

FIFOs category
Frequency at most

72251L15JGI Applications

There are a lot of Integrated Device Technology (IDT) 72251L15JGI FIFOs Memory applications.

• High-speed disk
• Test site
• Queues for communication systems
• Application that requires re-writable nonvolatile parameter memory
• Networking
• SPD for DDR3 Memory Modules
• Firmware loaders
• SPI Bus Flash Memory Device
• Measurement Equipment
• Digital buffering