72251L25JI8

72251L25JI8 Overview

You will find FIFO memory chip in the PLCC package.Tape & Reel case is used for packaging.Mounting it in the Surface Mount way is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.I found that it has 32 terminations in FIFO means.There are 32 pins on the operation pins.The maximum current required for its operation is 50mA .When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.A self-contained gadget is contained within FIFOs .The IC of the part is OTHER FIFO memory type.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 32 pins on this board.In the presence of a 40MHz frequency, it can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 40MHz .There are normally 5V power supplies attached to the component.

72251L25JI8 Features

FIFOs category
Frequency at most

72251L25JI8 Applications

There are a lot of Integrated Device Technology (IDT) 72251L25JI8 FIFOs Memory applications.

• MP3 Interface for Automobile
• A/D output buffers
• Portable Information Devices
• General Data Collection Applications at Extreme High-Temperatures
• General Data Collection Applications at Low-Temperatures
• Desktop Computers
• SPI Bus Flash Memory Device
• High-speed graphics pixel buffer
• Game Controller
• Controlled baseline