72401L10P

72401L10P Overview

The PDIP package contains FIFO memory chip.A memory of 32B is available for storing applications and data on this FIFO chip.Through Hole is memory IC's recommended mounting method.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO consists of 16 terminations, which indicates that FIFO means is empty.FIFO design has 16 operation pins.FIFO design requires 35mA amps of current to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is self-contained in FIFOs .It has a OTHER FIFO memory type IC.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 5.5V volts.The FIFO memory IC has a total of 16 pins.10MHz is the FIFO memory IC's maximum value for regular operation.The component normally owns 5V power supplies.It is also possible to generate FALL THRU 65NS by using this FIFO memory.By using 1 circuitry, FIFO memory chip has enhanced flexibility.

72401L10P Features

32B memory size
FIFOs category
Frequency at most

72401L10P Applications

There are a lot of Integrated Device Technology (IDT) 72401L10P FIFOs Memory applications.

• GPS Offender Tracking
• Video time base correction
• Networking
• Computer Systems
• Thermal Management for DDR3 Memory Modules
• Data-acquisition systems
• Temporary storage elements
• Test site
• Network switching/routing
• SPI Bus Flash Memory Device