72605L50PF8

72605L50PF8 Overview

TQFP is a package that contains FIFO memory chip.Tape & Reel case is used for packaging.Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 64 terminations.There are 64 pins for operation.FIFO design requires a maximum current of 230mA to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.It is contained within FIFOs .It has a type BI-DIRECTIONAL FIFO memory IC.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.Approximately 64 pins are attached to it.When the frequency is set to 20MHz it can maintain good accuracy.During regular operation, 20MHz is the FIFO memory's maximum value.Normally, the component owns 5V power supplies.Using this gadget, BYPASS REGISTER can also be generated.

72605L50PF8 Features

FIFOs category
Frequency at most

72605L50PF8 Applications

There are a lot of Integrated Device Technology (IDT) 72605L50PF8 FIFOs Memory applications.

• Disk Controllers
• Desktop Computers
• One assembly
• Test Equipment
• Communications Systems
• High-speed graphics pixel buffer
• Data
• Down-Hole Energy Drilling
• Portable Information Devices
• Switches