72615L50PF

72615L50PF Overview

TQFP is a package that contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.A total of 64 terminations are contained within FIFO means.64 pins are the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 230mA .In order to maximize efficiency, the supply voltage should be set to 5V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.The gadget is self-contained and can be found in FIFOs .This part is equipped with an IC of type BI-DIRECTIONAL FIFO memory.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 64 pins on this board.A frequency of 20MHz is sufficient to maintain good accuracy.A FIFO memory's maximum value of 20MHz can be used for regular operation.Normally, the component owns 5V power supplies.It is also possible to generate BYPASS REGISTER using this FIFO memory.

72615L50PF Features

FIFOs category
Frequency at most

72615L50PF Applications

There are a lot of Integrated Device Technology (IDT) 72615L50PF FIFOs Memory applications.

• HDD
• Consumer Systems
• Measurement Equipment
• Magnetic memories
• Down-Hole Energy Drilling
• Data
• PC peripheral
• Data-acquisition systems
• Video Processing
• Event Recorder