72811L10TFG8

72811L10TFG8 Overview

The LQFP package contains FIFO memory chip.The package comes in a case of Tape & Reel .It is recommended that memory IC be mounted in the Surface Mount direction.High efficiency is possible with a supply voltage of 5V .64 terminations are contained in FIFO means.There are 64 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.FIFOs contains this gadget in its entirety.This part is equipped with an IC of type OTHER FIFO memory.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.This FIFO memory IC is equipped with 64 pins in total.With a frequency of 100MHz , it exhibits good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.

72811L10TFG8 Features

FIFOs category
Frequency at most

72811L10TFG8 Applications

There are a lot of Integrated Device Technology (IDT) 72811L10TFG8 FIFOs Memory applications.

• SPI Bus Flash Memory Device
• Cardiac Monitoring Device
• Alarm System
• Wireless
• Code converters
• Thermal Management for DDR3 Memory Modules
• Buses
• Portable Information Devices
• Multimedia
• Emulators