72811L25PF

72811L25PF Overview

TQFP is a package that contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains a total of 64 terminations.There are 64 pins on the operation pins.There is a maximum current requirement of 60mA for its operation.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .This part has a memory type of OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.A total of 64 pins are present on the FIFO memory IC.In the presence of a 40MHz frequency, it can maintain good accuracy.For regular operation, the memory logic's maximum value is 40MHz .Normally, the component owns 5V power supplies.

72811L25PF Features

FIFOs category
Frequency at most

72811L25PF Applications

There are a lot of Integrated Device Technology (IDT) 72811L25PF FIFOs Memory applications.

• SPI Bus Flash Memory Devices
• Down-Hole Energy Drilling
• Network bridges
• Fabrication Site
• Programmable Logic Controller
• Product traceability
• IP Camera Buffer
• Seismic Data Collection at Extreme Temperatures
• Tape controllers
• Wireless