72821L15PFI8

72821L15PFI8 Overview

You can find FIFO memory chip in package TQFP .There's a Tape & Reel on the package.It is pointing in the direction of Surface Mount .It is possible to achieve high efficiency with a supply voltage of 5V .FIFO means contains a total of 64 terminations.64 pins are the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .A supply voltage of 5V is recommended for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.In FIFOs , this gadget is self-contained.This part is equipped with an IC of type OTHER FIFO memory.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 5.5V V.Approximately 64 pins are attached to it.With a frequency of 66.7MHz , it exhibits good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .Normally, 5V power supplies are owned by the component.

72821L15PFI8 Features

FIFOs category
Frequency at most

72821L15PFI8 Applications

There are a lot of Integrated Device Technology (IDT) 72821L15PFI8 FIFOs Memory applications.

• Industrial Systems
• Video time base correction
• Network bridges
• Fabrication Site
• IP Camera Buffer
• Optical memories
• Programmable Logic Controller
• Buses
• High-speed disk
• Communications Systems