72825LB15PF8

72825LB15PF8 Overview

TQFP is a package that contains FIFO memory chip.Mounting it Surface Mount is recommended.Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 128 terminations.These are the 128 pins for operation.In order for FIFO design to operate, a maximum current of 100mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.Currently, it has 128 pins.A frequency of 66.7MHz is sufficient to maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .A component normally has 5V power supplies attached to it.

72825LB15PF8 Features

FIFOs category
Frequency at most

72825LB15PF8 Applications

There are a lot of Integrated Device Technology (IDT) 72825LB15PF8 FIFOs Memory applications.

• Communications Systems
• Transistors
• High-speed disk
• High-speed graphics pixel buffer
• Disk Controllers
• Firmware loaders
• HDD
• Video time base correction
• Programmable Logic Controller
• Test site