72825LB15PFGI

72825LB15PFGI Overview

You will find FIFO memory chip in the TQFP package.The package comes in a case of Bulk .The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO consists of 128 terminations, which indicates that FIFO means is empty.The operation pins are 128 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 100mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 85°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.There are a total of 128 pins on this board.It is capable of maintaining good accuracy with a frequency of 66.7MHz .The memory logic's maximum value is 66.7MHz for regular operation.Normally, 5V power supplies are owned by the component.

72825LB15PFGI Features

FIFOs category
Frequency at most

72825LB15PFGI Applications

There are a lot of Integrated Device Technology (IDT) 72825LB15PFGI FIFOs Memory applications.

• GPS Offender Tracking
• Network switching/routing
• Extended product life cycle
• Laser Receiver System
• Cameras
• Video time base correction
• Magnetic memories
• Test Equipment
• Application that requires re-writable nonvolatile parameter memory
• PC peripheral