72831L10PFG

72831L10PFG Overview

TQFP is a package that contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V , high efficiency is possible.I found that it has 64 terminations in FIFO means.In the case of the operation pins, they are 64 pins.In order to operate it, it requires 60mA volts of current.A voltage of 5V should be used for FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is contained within FIFOs .It has a OTHER FIFO memory type IC.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum voltage of 5.5V volts can be applied to FIFO memory.It consists of a total of 64 pins.When the frequency is set to 100MHz , the system can maintain good accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.A component normally has 5V power supplies attached to it.

72831L10PFG Features

FIFOs category
Frequency at most

72831L10PFG Applications

There are a lot of Integrated Device Technology (IDT) 72831L10PFG FIFOs Memory applications.

• MP3 Interface for Automobile
• Buses
• SPD for DDR3 Memory Modules
• Rate buffers
• Magnetic memories
• Analog-to-digital converters
• Measurement Equipment
• Transistors
• General Data Collection Applications at Low-Temperatures
• SPI Bus Flash Memory Device