72831L15TF8

72831L15TF8 Overview

This package is included in TQFP .Surface Mount is recommended as the mounting method.An input voltage of 5V results in high efficiency.A total of 64 terminations can be found in FIFO means.These are the 64 pins for operation.In order to operate it, it requires 60mA volts of current.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.Approximately 64 pins are attached to it.It maintains good accuracy at a 66.7MHz frequency.During normal operation, the FIFO memory's maximum value is 66.7MHz .Normally, 5V power supplies are owned by the component.

72831L15TF8 Features

FIFOs category
Frequency at most

72831L15TF8 Applications

There are a lot of Integrated Device Technology (IDT) 72831L15TF8 FIFOs Memory applications.

• SPI Bus Flash Memory Devices
• Notebook
• Microprogramming
• Test site
• Network bridges
• One assembly
• Seismic Data Collection at Extreme Temperatures
• Programmable Logic Controller
• High-speed graphics pixel buffer
• Cardiac Monitoring Device