72831L25PFI8

72831L25PFI8 Overview

TQFP is a package that contains FIFO memory chip.There is a case Tape & Reel in which it is packaged.It is pointing in the direction of Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 64 terminations.FIFO design has 64 operation pins.FIFO requires a minimum of 60mA current to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.Approximately 64 pins are attached to it.A frequency of 40MHz is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 40MHz .Normally, the component owns 5V power supplies.

72831L25PFI8 Features

FIFOs category
Frequency at most

72831L25PFI8 Applications

There are a lot of Integrated Device Technology (IDT) 72831L25PFI8 FIFOs Memory applications.

• Telecommunication
• Data-acquisition systems
• Application that requires re-writable nonvolatile parameter memory
• High-speed disk
• Network switching/routing
• Code converters
• Game Consoles
• TVs
• SPI Bus Flash Memory Device
• Magnetic memories