72841L10TFG

72841L10TFG Overview

You will find FIFO memory chip in the LQFP package.You'll find it packaged in the shape of a Bulk .Memory IC's recommended mounted way is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.64 terminations are contained in FIFO means.The operation pins are 64 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .A 5V supply voltage will ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is contained within FIFOs .It has a type OTHER FIFO memory IC.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.There are a total of 64 pins on this board.When the frequency is set to 100MHz , the system can maintain good accuracy.Normally, the FIFO memory's maximum value is 100MHz .In normal circumstances, the component has 5V power supplies.

72841L10TFG Features

FIFOs category
Frequency at most

72841L10TFG Applications

There are a lot of Integrated Device Technology (IDT) 72841L10TFG FIFOs Memory applications.

• High-speed disk
• Networking
• Test Equipment
• Consumer
• Tape controllers
• Video time base correction
• Network bridges
• TVs
• Event Recorder
• General Data Collection Applications at Extreme High-Temperatures