72841L10TFG8

72841L10TFG8 Overview

You can find FIFO memory chip in package LQFP .There's a Tape & Reel on the package.The recommended mounting way is Surface Mount .An input voltage of 5V results in high efficiency.A total of 64 terminations are contained within FIFO means.There are 64 pins on the operation pins.FIFO requires a minimum of 60mA current to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is contained within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.The FIFO memory IC has a total of 64 pins.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.Normally, the component owns 5V power supplies.

72841L10TFG8 Features

FIFOs category
Frequency at most

72841L10TFG8 Applications

There are a lot of Integrated Device Technology (IDT) 72841L10TFG8 FIFOs Memory applications.

• Firmware loaders
• Multimedia
• Measurement Equipment
• Test Equipment
• IP Camera Buffer
• GPS Offender Tracking
• Video time base correction
• Network bridges
• Queues for communication systems
• Transistors