72851L10TF

72851L10TF Overview

LQFP is the package in which FIFO memory chip is contained.Surface Mount is recommended as the mounting method.A supply voltage of 5V allows for high efficiency.As a result of this, FIFO means contains 64 terminations.64 pins are used for operation.For its operation, 80mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 5V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.A total of 64 pins are present on the FIFO memory IC.In the presence of a 100MHz frequency, it can maintain good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.Normally, 5V power supplies are owned by the component.

72851L10TF Features

FIFOs category
Frequency at most

72851L10TF Applications

There are a lot of Integrated Device Technology (IDT) 72851L10TF FIFOs Memory applications.

• High-speed graphics pixel buffer
• Queues for communication systems
• Consumer
• Signal processing
• Routers
• HDD
• Multi-stage synchronizer
• Network bridges
• Test Equipment
• TVs