72V243L7-5PFGI

72V243L7-5PFGI Overview

TQFP is the package in which FIFO memory chip is contained.There's a Bulk on the package.Mounting it in the Surface Mount way is recommended.A supply voltage of 3.3V allows for high efficiency.FIFO means contains 80 terminations.There are 80 pins for operation.FIFO design requires a maximum current of 30mA to operate.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained within FIFOs .In this part, the memory type is OTHER FIFO .Low supply voltages, such as 3.15V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 3.45V volts.Approximately 80 pins are attached to it.The memory logic's maximum value is 133.3MHz for regular operation.The gadget can also generate a value of IT CAN ALSO BE CONFIGURED AS 4K X 9; RETRANSMIT; ASYNCHRONOUS MODE IS ALSO POSSIBLE .

72V243L7-5PFGI Features

FIFOs category
Frequency at most

72V243L7-5PFGI Applications

There are a lot of Integrated Device Technology (IDT) 72V243L7-5PFGI FIFOs Memory applications.

• Digital buffering
• Event Recorder
• Magnetic memories
• Character generators
• Fabrication Site
• Computers
• Product traceability
• Extended product life cycle
• Laser Receiver System
• SPI Bus Flash Memory Devices