72V245L10TFG

72V245L10TFG Overview

LQFP is the package in which FIFO memory chip is contained.There is a memory of 9kB available for storing data and applications.Mounting it Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .A total of 64 terminations can be found in FIFO means.64 pin is used for operation.There is a maximum current requirement of 30mA for its operation.A voltage of 3.3V should be used for FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.70°C °C is the memory logic's maximum operating temperature that allows stable operation.FIFOs contains this gadget in its entirety.In this part, the memory type is OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.A maximum voltage of 3.6V volts can be applied to FIFO memory.Approximately 64 pins are attached to it.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .This gadget can also be used to generate EASILY EXPANDABLE IN DEPTH AND WIDTH .By using 2 circuits, FIFO memory chip has greater flexibility.

72V245L10TFG Features

9kB memory size
FIFOs category
Frequency at most

72V245L10TFG Applications

There are a lot of Integrated Device Technology (IDT) 72V245L10TFG FIFOs Memory applications.

• High-speed graphics pixel buffer
• Application that requires re-writable nonvolatile parameter memory
• Controlled baseline
• TVs
• SPD for DDR3 Memory Modules
• Data
• Measurement Equipment
• Test Equipment
• Video time base correction
• SPI Bus Flash Memory Device