72V273L15PF

72V273L15PF Overview

TQFP is the package in which FIFO memory chip is contained.Surface Mount is memory IC's recommended mounting method.With a supply voltage of 3.3V volts, high efficiency is possible.80 terminations are contained in FIFO means.As far as the operation pins are concerned, they are 80 pins.FIFO requires a minimum of 35mA current to operate.A voltage of 3.3V should be used for FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at a very low supply voltage, such as 3.15V V.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.Approximately 80 pins are attached to it.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .

72V273L15PF Features

FIFOs category
Frequency at most

72V273L15PF Applications

There are a lot of Integrated Device Technology (IDT) 72V273L15PF FIFOs Memory applications.

• Buses
• Digital buffering
• Test site
• HDD
• Game Consoles
• Telecommunication
• SPI Bus Flash Memory Device
• Firmware loaders
• GPS Offender Tracking
• Code converters