72V273L7-5PFGI8

72V273L7-5PFGI8 Overview

FIFO memory chip can be found in the TQFP package.It comes in a Tape & Reel package.Mounting it Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .The number of terminations in FIFO means is 80 .FIFO design has 80 operation pins.In order for FIFO design to operate, a maximum current of 35mA is required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.A self-contained gadget is contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.A maximum voltage of 3.45V volts can be applied to FIFO memory.Approximately 80 pins are attached to it.In the presence of a 133.3MHz frequency, it can maintain good accuracy.There is 133.3MHz FIFO memory IC's maximum value for regular operation.

72V273L7-5PFGI8 Features

FIFOs category
Frequency at most

72V273L7-5PFGI8 Applications

There are a lot of Integrated Device Technology (IDT) 72V273L7-5PFGI8 FIFOs Memory applications.

• Temporary storage elements
• One assembly
• SPI Bus Flash Memory Device
• Computer networks
• Alarm System
• IP Radio
• IP Camera Buffer
• Consumer Systems
• Laser Receiver System
• Rate buffers