72V283L6PF

72V283L6PF Overview

TQFP is the package in which FIFO memory chip is contained.This FIFO memory chip is packaged as a Bulk .It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.A total of 80 terminations are contained within FIFO means.There are 80 pins on the operation pins.There is a maximum current requirement of 35mA for its operation.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.It is self-contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.An input voltage of 3.45V V is the maximum that FIFO memory can handle.This FIFO memory IC is equipped with 80 pins in total.With a frequency of 166MHz , it exhibits good accuracy.The memory logic's maximum value is 166MHz for regular operation.

72V283L6PF Features

FIFOs category
Frequency at most

72V283L6PF Applications

There are a lot of Integrated Device Technology (IDT) 72V283L6PF FIFOs Memory applications.

• Telecommunication
• A/D output buffers
• SPI Bus Flash Memory Device
• Battery Charger
• IP Camera Buffer
• Cardiac Monitoring Device
• PC peripheral
• Test site
• Code converters
• Address mapping