72V3660L7-5PF8

72V3660L7-5PF8 Overview

FIFO memory chip is included in the TQFP package.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.A total of 128 terminations can be found in FIFO means.128 pins are used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 40mA .FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO may operate at a very low supply voltage, such as 3.15V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.45V volts.Approximately 128 pins are attached to it.During regular operation, 133.3MHz is the FIFO memory's maximum value.It is also possible to generate RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE with the use of this FIFO memory.

72V3660L7-5PF8 Features

FIFOs category
Frequency at most

72V3660L7-5PF8 Applications

There are a lot of Integrated Device Technology (IDT) 72V3660L7-5PF8 FIFOs Memory applications.

• Measurement Equipment
• One assembly
• Firmware loaders
• Code converters
• Network bridges
• Consumer
• Thermal Management for DDR3 Memory Modules
• Controlled baseline
• Battery Charger
• Buses