72V815L10PFG

72V815L10PFG Overview

TQFP is the package in which FIFO memory chip is contained.Mounting it in Surface Mount is recommended.High efficiency is possible with a supply voltage of 3.3V .As a result of this, FIFO means contains 128 terminations.These are the 128 pins for operation.There is a maximum current requirement of 60mA for its operation.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.An input voltage of 3.6V V is the maximum that FIFO memory can handle.Approximately 128 pins are attached to it.It is capable of maintaining good accuracy with a frequency of 100MHz .A FIFO memory's maximum value of 100MHz can be used for regular operation.

72V815L10PFG Features

FIFOs category
Frequency at most

72V815L10PFG Applications

There are a lot of Integrated Device Technology (IDT) 72V815L10PFG FIFOs Memory applications.

• Game Consoles
• TVs
• Application that requires re-writable nonvolatile parameter memory
• Computer networks
• Switches
• MP3 Interface for Automobile
• High-speed graphics pixel buffer
• Tape controllers
• Microprogramming
• Transistors