74ABT374CSCX

74ABT374CSCX Overview

20-SOIC (0.295, 7.50mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. The 74ABTseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 200MHz. A total of 1elements are contained within it. There is 50μA quiescent consumption. The 74ABT374family includes it. This T flip flop has a capacitance of 5pF farads at the input. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. There are 8bits in its design. Using 8 circuits, it is highly flexible. In order to ensure high efficiency, the supply voltage should remain at 5V. In order for the chip to function, it has 3output lines. Currently, there are 1 input lines present. In this case, the high level output current is set to -32mA. It is set to 64mAfor low level output current. Ideally, the operating temperature should be lower than 85°C. Temperatures above -40°Cshould be used. In order for it to operate, a supply voltage of 4.5Vis required. 5.5Vis its maximum supply voltage. It is possible to achieve a frequency of 150MHz.

74ABT374CSCX Features

Tape & Reel (TR) package
74ABT series
20 pins
8 Bits

74ABT374CSCX Applications

There are a lot of ON Semiconductor 74ABT374CSCX Flip Flops applications.

• CMOS Process
• ATE
• Clock pulse
• Shift registers
• Digital electronics systems
• Event Detectors
• Reduced system switching noise
• ESD protection
• Load Control
• Frequency Dividers