74ABT574CMTC

74ABT574CMTC Overview

20-TSSOP (0.173, 4.40mm Width)is the packaging method. It is contained within the Tubepackage. T flip flop uses Tri-State, Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. Currently, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. FPGAs belonging to the 74ABTseries contain this type of chip. It should not exceed 200MHzin terms of its output frequency. A total of 1elements are contained within it. During its operation, it consumes 50μA quiescent energy. Members of the 74ABT574family make up this object. JK flip flop input capacitance is 5pF farads. There is an electronic part that is mounted in the way of Surface Mount. A total of 20pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. The design is based on 8bits. To achieve this superior flexibility, 8 circuits are used. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In order for the chip to function, it has 3output lines. This input has 1lines in it. High level output current is set to -32mA. The low level output current is set to 64mA. Operating temperatures should be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. It is powered by 4.5V as its minimum supply voltage. It supports a maximum supply voltage of 5.5V volts. This frequency can be achieved 200MHz.

74ABT574CMTC Features

Tube package
74ABT series
20 pins
8 Bits

74ABT574CMTC Applications

There are a lot of ON Semiconductor 74ABT574CMTC Flip Flops applications.

• Bounce elimination switch
• Data Synchronizers
• Count Modes
• Digital electronics systems
• Frequency Divider circuits
• Clock pulse
• Power down protection
• Supports Live Insertion
• Synchronous counter
• Memory