74ABT574CSJ

74ABT574CSJ Overview

As a result, it is packaged as 20-SOIC (0.209, 5.30mm Width). As part of the package Tube, it is embedded. In the configuration, Tri-State, Invertedis used as the output. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74ABTseries FPGA. A frequency of 200MHzshould be the maximum output frequency. A total of 1 elements are present. As a result, it consumes 50μA quiescent current and is not affected by external forces. There are 20 terminations,A voltage of 5V is used as the power supply for this D latch. A JK flip flop with a 5pFfarad input capacitance is used here. ABTis the family of this D flip flop. In this case, the maximum supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. The flip flop has 2ports embedded within it. There is also a characteristic of BROADSIDE VERSION OF 374.

74ABT574CSJ Features

Tube package
74ABT series

74ABT574CSJ Applications

There are a lot of Rochester Electronics, LLC 74ABT574CSJ Flip Flops applications.

• Balanced Propagation Delays
• High Performance Logic for test systems
• Count Modes
• Buffered Clock
• Latch-up performance
• Individual Asynchronous Resets
• Dynamic threshold performance
• Patented noise
• Storage registers
• Modulo – n – counter