74ABT823D,602

74ABT823D,602 Overview

24-SOIC (0.295, 7.50mm Width)is the way it is packaged. You can find it in the Tubepackage. The output it is configured with uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at -40°C~85°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74ABT series. In order for it to function properly, its output frequency should not exceed 200MHz. A total of 1elements are contained within it. As a result, it consumes 250μA quiescent current. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the 74ABT823 family. A voltage of 5V is used as the power supply for this D latch. A 4pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as ABT. This RS flip flops is a part number FF/Latches. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be kept above 4.5V. The D latch runs on a voltage of 5V volts. This flip flop has a total of 2ports. Additionally, there are WITH CLEAR AND CLOCK ENABLE on the electronic flip flop that can be referred to.

74ABT823D,602 Features

Tube package
74ABT series
5V power supplies

74ABT823D,602 Applications

There are a lot of NXP USA Inc. 74ABT823D,602 Flip Flops applications.

• Frequency Dividers
• Memory
• Bus hold
• Digital electronics systems
• Set-reset capability
• Single Up Count-Control Line
• ESCC
• Shift registers
• Data Synchronizers
• QML qualified product