74AC16374DL

74AC16374DL Overview

The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. D flip flop is included in the Tubepackage. It is configured with Tri-State, Non-Invertedas an output. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 3V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74AC series. Its output frequency should not exceed 100MHz. The list contains 2 elements. It has been determined that there have been 48 terminations. The 74AC16374family includes it. The power supply voltage is 5V. JK flip flop input capacitance is 3pF farads. A device of this type belongs to the family of AC. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 16bits in its design. It is imperative that the supply voltage (Vsup) is maintained above 3Vin order to ensure normal operation. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If high efficiency is desired, the supply voltage should be kept at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. To operate, the chip has a total of 3 output lines. 8μAquiescent current consumed.

74AC16374DL Features

Tube package
74AC series
48 pins
16 Bits

74AC16374DL Applications

There are a lot of Texas Instruments 74AC16374DL Flip Flops applications.

• Consumer
• Circuit Design
• Asynchronous counter
• Memory
• Clock pulse
• Registers
• Shift registers
• CMOS Process
• Single Down Count-Control Line
• Communications