74AC175SCX

74AC175SCX Overview

The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tape & Reel (TR)package. As configured, the output uses Differential. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74ACseries contain this type of chip. You should not exceed 244MHzin its output frequency. The list contains 1 elements. As a result, it consumes 40μA of quiescent current without being affected by external factors. It is a member of the 74AC175 family. Its input capacitance is 4.5pF farads. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. There is a clock edge trigger type of Positive Edgeon this device. 4bits are used in its design. The superior flexibility is achieved through the use of 4 circuits. In order to operate, the chip has 2 output lines. This input has 1lines in it. There is -24mA output current at the high level. A 24mAvalue is set for low-level output current. The operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. In order for it to operate, a supply voltage of 2Vis required. It is capable of supporting a maximum supply voltage of 6V. This frequency can be achieved at 244MHz.

74AC175SCX Features

Tape & Reel (TR) package
74AC series
16 pins
4 Bits

74AC175SCX Applications

There are a lot of ON Semiconductor 74AC175SCX Flip Flops applications.

• Frequency Divider circuits
• Latch-up performance
• Circuit Design
• Patented noise
• Buffered Clock
• Test & Measurement
• Data Synchronizers
• CMOS Process
• Supports Live Insertion
• Control circuits