74AC373MTC

74AC373MTC Overview

The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). The package is in the form of Tube. In this configuration, the output is set to Tri-State. This electrical device has the logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. The voltage supply is 2V~6V. The temperature at which the machine is operating is -40°C~85°C. It is a type of FPGA belonging to the 74AC series. The design of this electronic part is based on 8 bits. As a member of the 74AC373 family, it falls under that category. In addition, it is designed with a pin number of 20. A Surface Mount mounting method has been used for this electronic part. An electronic circuit can be found on 2 input lines. It features maximum flexibility in design due to 24mA output current. The binary equivalent of the input line is generated by 8 output lines. The element count is 1. 8 circuits are used to achieve superior flexibility. It is set to zero for the low level output current. There is -24mA output current at the high level. Operating temperatures should be below 85°C. A temperature greater than -40°C should be used for operation. The maximum supply voltage is 6V. It operates with the minimal supply voltage of 2V.

74AC373MTC Features

20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC373 family
20 pins
1 elements

74AC373MTC Applications

There are a lot of ON Semiconductor 74AC373MTC Latches applications.

• Synchronous frequency dividers
• Automotive Cluster
• Relay replacement
• Frequency
• Network Switches
• A/D converters
• Hammer
• Parallel Input
• Double bus register system
• Decade counting