74AC374MTC

74AC374MTC Overview

The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. Package Tubeembeds it. It is configured with Tri-State, Non-Invertedas an output. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. It is operating at -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In FPGA terms, D flip flop is a type of 74ACseries FPGA. There should be no greater frequency than 155MHzon its output. The list contains 1 elements. Despite external influences, it consumes 40μAof quiescent current. The object belongs to the 74AC374 family. Input capacitance of this device is 4.5pF farads. There is an electronic component mounted in the way of Surface Mount. A total of 20pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. The design is based on 8bits. To achieve this superior flexibility, 8 circuits are used. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 8 output lines on it. It is reported that there are 1 input lines. -24mAis the output current at high level. A 24mAvalue is set for low-level output current. It is recommended that the operating temperature be below 85°C. Ideally, the operating temperature should be higher than -40°C. The minimum voltage required for operation is 2V. It supports the maximal supply voltage of 6V. The frequency that can be achieved is 155MHz.

74AC374MTC Features

Tube package
74AC series
20 pins
8 Bits

74AC374MTC Applications

There are a lot of ON Semiconductor 74AC374MTC Flip Flops applications.

• Asynchronous counter
• ESD performance
• Data storage
• Data Synchronizers
• Single Up Count-Control Line
• Safety Clamp
• Registers
• Cold spare funcion
• Counters
• Individual Asynchronous Resets