74AC574SC

74AC574SC Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. D flip flop is embedded in the Tube package. T flip flop uses Tri-State, Non-Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. -40°C~85°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74ACseries contain this type of chip. A frequency of 153MHzshould be the maximum output frequency. In total, it contains 1 elements. There is 40μA quiescent consumption. It is a member of the 74AC574 family. Its input capacitance is 4.5pF farads. A part of the electronic system is mounted in the way of Surface Mount. The 20pins are designed into the board. This device has the clock edge trigger type of Positive Edge. This flip flop is designed with 8 Bits. To achieve this superior flexibility, 8 circuits are used. This T flip flop features a maximum design flexibility due to its output current of 24mA. In order for the chip to function, it has 3output lines. This input has 1lines in it. A -24mAvalue is set for the high level output current. In the low level output current setting, the current is set to 24mA. The operating temperature should be lower than 85°C. It should be higher than -40°Cwhen the system is operating. Initially, it requires a voltage of 2V as the minimum supply voltage. It supports the maximal supply voltage of 6V. This frequency can be achieved at 153MHz.

74AC574SC Features

Tube package
74AC series
20 pins
8 Bits

74AC574SC Applications

There are a lot of ON Semiconductor 74AC574SC Flip Flops applications.

• Latch-up performance
• Clock pulse
• Convert a momentary switch to a toggle switch
• ATE
• Modulo – n – counter
• Memory
• Data transfer
• Latch
• Load Control
• Frequency division