74AC74MTC

74AC74MTC Overview

It is embeded in 14-TSSOP (0.173, 4.40mm Width) case. As part of the package Tube, it is embedded. T flip flop uses Differentialas the output. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 2V~6V volts. In the operating environment, the temperature is -40°C~85°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74ACseries contain this type of chip. It should not exceed 160MHzin terms of its output frequency. A total of 2elements are present in it. As a result, it consumes 20μA quiescent current and is not affected by external forces. You can search similar parts based on 74AC74. Its input capacitance is 4.5pF farads. The electronic part is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. 2bits are used in its design. Its superior flexibility is attributed to its use of 2 circuits. There are no output lines on the JK flip flop. This input has 4lines. It is set to -24mAfor the high level output current. 24mA is the low level output current. Ideally, the operating temperature should be below 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. The minimal supply voltage is 2V. 6Vis the maximum supply voltage supported by it. We are able to achieve a frequency of 125MHz.

74AC74MTC Features

Tube package
74AC series
14 pins
2 Bits

74AC74MTC Applications

There are a lot of ON Semiconductor 74AC74MTC Flip Flops applications.

• Asynchronous counter
• Set-reset capability
• Divide a clock signal by 2 or 4
• Frequency Dividers
• Modulo – n – counter
• Dynamic threshold performance
• Buffered Clock
• Storage Registers
• CMOS Process
• ESD protection