74ACT16373MTD

74ACT16373MTD Overview

In the 48-TFSOP (0.240, 6.10mm Width) package, it can be found as an embedded module. Tube is the way it is packaged. In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The way in which this electronic part is mounted is Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74ACT family. With this electronic part, there are 16 bits. The family it belongs to is 74ACT16373. Designed with 48 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. There are electronic circuits attached to the 4 input lines. A high efficiency supply voltage should be maintained at 5V. It follows that 16 output lines are generated from the binary equivalent of the input line. The element count is 2. 8 circuits are used to provide this superior level of flexibility. It has been set to 24mA for the low level output current. -24mA is the high level output current. Operating temperatures should be below 85°C. It is recommended to operate at a temperature higher than -40°C. It supports a maximum supply voltage of 5.5V. This device requires a minimum voltage of 4.5V.

74ACT16373MTD Features

48-TFSOP (0.240, 6.10mm Width) package
74ACT series
16 Bits
74ACT16373 family
48 pins
2 elements

74ACT16373MTD Applications

There are a lot of ON Semiconductor 74ACT16373MTD Latches applications.

• Parallel Output
• Multistage ripple counting
• Automotive Cluster
• Pseudo-random code generators
• Shift left with parallel loading
• Ring counter
• Data acquisition
• Display driver
• Four-bit storage with output enable
• Pattern Generators