74ACT16373MTDX

74ACT16373MTDX Overview

A package called 48-TFSOP (0.240, 6.10mm Width) contains it. Tape & Reel (TR) is the way in which it is packaged. In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. This FPGA is part of the 74ACT series. With this electronic part, there are 16 bits. This type belongs to the 74ACT16373 family. Designed with 48 pins, it is compatible with a wide range of devices. Surface Mount is the method used for mounting this electronic part. Electronic circuits comprise 4 input lines. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It follows that 16 output lines are generated from the binary equivalent of the input line. This element consists of 2. 8 circuits are used to provide this superior level of flexibility. The low level output current is set to 24mA. The high level output current is set to -24mA. A temperature below 85°C should be used for operation. A temperature greater than -40°C should be used for operation. It is capable of providing a maximum supply voltage of 5.5V. A minimal voltage of 4.5V is needed to operate it.

74ACT16373MTDX Features

48-TFSOP (0.240, 6.10mm Width) package
74ACT series
16 Bits
74ACT16373 family
48 pins
2 elements

74ACT16373MTDX Applications

There are a lot of ON Semiconductor 74ACT16373MTDX Latches applications.

• Data acquisition
• Registers
• Automotive Cluster
• Pseudo-random code generators
• Programmable binary
• Serial Output Data Queuing
• BCD counting
• Automotive ADAS
• Control circuits
• Display