74ACT16374DLG4

74ACT16374DLG4 Overview

As a result, it is packaged as SSOP. Terminations are 48. An input voltage of 5Vpowers the D latch. This D flip flop belongs to the family of ACT. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 48 pins. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. The flip flop is designed with 16bits. To achieve this superior flexibility, 2 circuits are used. A power supply of 5Vis required to operate it. The flip flop contains 2ports. For high efficiency, the supply voltage should be set to 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 1input lines have been provided. Quiescent current is consumed by the D latch in the amount of 8μA. -24mA is set as the high level output current. In the low level output current setting, the current is set to 24mA. Operating temperatures should be lower than 85°C. Ideally, the operating temperature should be greater than -40°C. The system operates with a minimum supply voltage of 4.5V. It supports a maximum supply voltage of 5.5V volts. This can be achieved at a frequency of 65MHz. BUS DRIVERis the logic IC it uses. The T flip flop is equipped with 2functions . A total of 48 pins are present on this device. The output current of 24mA makes it feature maximum design flexibility.

74ACT16374DLG4 Features

48 pins
16 Bits
5V power supplies
2 Functions
48 pin count

74ACT16374DLG4 Applications

There are a lot of Texas Instruments 74ACT16374DLG4 Flip Flops applications.

• Set-reset capability
• Supports Live Insertion
• Data transfer
• ESCC
• ESD protection
• Buffer registers
• Data Synchronizers
• Shift registers
• Memory
• Clock pulse