74ACT175SCX

74ACT175SCX Overview

The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). It is included in the package Tape & Reel (TR). There is a Differentialoutput configured with it. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74ACT series. You should not exceed 236MHzin the output frequency of the device. The element count is 1 . As a result, it consumes 40μA quiescent current and is not affected by external forces. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. A voltage of 5V is used to power it. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In this case, the D flip flop belongs to the ACTfamily. In this case, the maximum supply voltage (Vsup) reaches 5.5V.

74ACT175SCX Features

Tape & Reel (TR) package
74ACT series

74ACT175SCX Applications

There are a lot of Rochester Electronics, LLC 74ACT175SCX Flip Flops applications.

• ESD protection
• Control circuits
• Frequency Divider circuits
• Computing
• Frequency Dividers
• Pattern generators
• CMOS Process
• Power down protection
• Bus hold
• Guaranteed simultaneous switching noise level