74ACT273B

74ACT273B Overview

20-DIP (0.300, 7.62mm)is the packaging method. D flip flop is included in the Tubepackage. The output it is configured with uses Non-Inverted. It is configured with the trigger Positive Edge. Through Holeis in the way of this electric part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -55°C~125°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74ACT series. A frequency of 190MHzshould not be exceeded by its output. D latch consists of 1 elements. This process consumes 4μA quiescents. It has been determined that there have been 20 terminations. You can search similar parts based on 74ACT273. The power supply voltage is 5V. JK flip flop input capacitance is 4pF farads. It belongs to the family of electronic devices known as ACT. This electronic part is mounted in the way of Through Hole. A total of 20pins are provided on this board. It has a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. It is designed with 8bits. Vsup reaches its maximum value at 5.5V. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. It operates from 5V power supplies. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

74ACT273B Features

Tube package
74ACT series
20 pins
8 Bits
5V power supplies

74ACT273B Applications

There are a lot of STMicroelectronics 74ACT273B Flip Flops applications.

• Counters
• Divide a clock signal by 2 or 4
• Latch
• Parallel data storage
• Single Down Count-Control Line
• Consumer
• Digital electronics systems
• Latch-up performance
• ESCC
• Instrumentation