74ACT373MTC

74ACT373MTC Overview

There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). It is packaged in the way of Tube. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Surface Mount method. The voltage supply is 4.5V~5.5V. There is -40°C~85°C operating temperature. An FPGA in this series belongs to the 74ACT family. It is designed with 8 bits. The family it belongs to is 74ACT373. The 20 pins are designed into it. This electronic part is mounted in the way of Surface Mount. Input Lines consist of electronic circuits, and there are 2. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. In total, it has 1 elements. In order to achieve its superior flexibility, 8 circuits are used. It has been set to 24mA for the low level output current. In the high level output current, the value is set to -24mA. Ideally, the operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. It is capable of providing a maximum supply voltage of 5.5V. This device requires a minimum voltage of 4.5V.

74ACT373MTC Features

20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pins
1 elements

74ACT373MTC Applications

There are a lot of ON Semiconductor 74ACT373MTC Latches applications.

• Counters
• Counter control
• Network Switches
• A/D and D/A conversion
• Hammer Device Information
• Digital bus buffer
• OC-48 communication systems
• Parallel data synchronization
• Clocks
• Up/down difference counting