74ACT373PC

74ACT373PC Overview

The package in which it is embedded is named 20-DIP (0.300, 7.62mm). A package of Tube has been used. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Through Hole. The voltage supply is 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74ACT family. The design of this electronic part contains 8 bits. It is a member of the 74ACT373 family. The 20 pins are designed into it. The electronic part is mounted using the Through Hole method. An electronic circuit can be found on 2 input lines. The 24mA output current gives it maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. 3 output lines generate the binary equivalent of the input lines. In total, it has 1 elements. In order to achieve its superior flexibility, 8 circuits are used. It is set to zero for the low level output current. There is -24mA output current at the high level. The operating temperature should be lower than 85°C. It is recommended to operate at a temperature higher than -40°C. 5.5V is the maximum voltage it supports. The minimal supply voltage is 4.5V.

74ACT373PC Features

20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT373 family
20 pins
1 elements

74ACT373PC Applications

There are a lot of ON Semiconductor 74ACT373PC Latches applications.

• Synchronous frequency dividers
• Buffer Storage
• Frequency dividing
• Double bus register system
• Audio and video switching
• Shift register
• Shift right with parallel loading
• Counter timers
• Shift left with parallel loading
• Hammer Device Information