74ACT373SC

74ACT373SC Overview

In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. The package is in the form of Tube. In its configuration, Tri-State is used as the output. There is D-Type Transparent Latch logic type for this electrical device. The way in which this electronic part is mounted is Surface Mount. There is no supply voltage for this device. During operation, the temperature is set at -40°C~85°C. This FPGA is part of the 74ACT series. Electronic parts with 8 bits are designed for this application. The family it belongs to is 74ACT373. The device has 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. It consists of 2 input lines from which an electronic circuit can be built. Its output current of 24mA ensures maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. 3 output lines provide binary equivalents of input lines. In total, it has 1 elements. 8 circuits enable it to achieve high performance. The low level output current is set to 24mA. There is -24mA output current at the high level. Lower than 85°C is the ideal operating temperature. In order for the system to operate properly, the operating temperature should be higher than -40°C. It is capable of providing a maximum supply voltage of 5.5V. There is a minimum supply voltage of 4.5V for it.

74ACT373SC Features

20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pins
1 elements

74ACT373SC Applications

There are a lot of ON Semiconductor 74ACT373SC Latches applications.

• Display
• Counter
• Multi-line decoders
• Parallel data storage
• Counter timers
• Registers
• Flip-flops
• Counters
• High-speed logic
• Serial Input